200W 100ah Complete Package | Victron | SOK LifePO4 | Switch Energy

Package Benefits:

• fully charge batteries in about two days
  
• LifePO4 batteries are almost 100% charging efficient, so maximize your sun hours
• 100A continuous discharge battery (good for a 1000W 120V inverter)
• Victron renowned quality
• all parts included for an almost plug and play system
• Bluetooth monitoring of the system

Includes:

• Victron SmartSolar MPPT Charge Controller with Bluetooth monitoring
  
• 200W Solar Panel
• SOK 100ah Lithium Iron Phosphate (LifePO4) battery
• 20ft pair of 10AWG MC4 Cables (solar panels to MPPT)
• 6ft set of 10AWG Cables (MPPT to battery and breaker)
• 1ft 10AWG Cable (breaker to MPPT)
• 30A Circuit breaker (between MPPT and battery)
• 20A Circuit breaker (between solar panels and MPPT)
• 4 x 1/4" ring terminals for the circuit breaker
• 2 x 5/16" ring terminals for the battery
• Instructions / wiring diagram

*If you are installing LifePO4 into a scenario where your vehicle will be charging the batteries or rely on charging with shore power, please note some extra steps are recommended:

• Charging with a vehicle: (even while towing) a DC to DC charger is recommended to prevent damage to your vehicle's alternator due to LifePO4's ability to charge so quickly. New vehicles with "Smart" alternators may not need this.
• Shore power charging: You may desire an upgraded DC converter as your trailer's current DC converter may only charge the battery to 50-60%. (LifePO4 at low charge has the same voltage as traditional batteries at full charge). The solar charger will continue to fully charge the battery though.