400W Solar | 200Ah AGM (2x 6V) | Victron | Switch Energy | Canbat | Complete Package

Package Benefits:

• 12 Volt ( 2 x 6V in series)
• drop in dual 6V RV system replacement
• fully charge batteries in about a day
  
• 200Ah AGM = 100Ah usable energy
  
• sealed AGM batteries can be installed in any orientation
• high continuous discharge current (can operate a loaded 3000W 120V inverter for ~15 minutes)
• Victron renowned quality charging system
  
• all parts included for an almost plug and play system
• Bluetooth monitoring of the system

Includes:

• Victron SmartSolar MPPT Charge Controller with Bluetooth monitoring
  
• 2 x 200W Solar Panel
• 2 x 6 Volt 200Ah Canbat AGM batteries
  
• cables for battery to battery series connections
• 20ft pair of 10AWG MC4 Cables (solar panels to MPPT)
• 6ft set of 10AWG Cables (MPPT to batteries and breaker)
• 1ft 10AWG Cable (breaker to MPPT)
• 30A Circuit breaker (between MPPT and batteries)
• 20A Circuit breaker (between solar panels and MPPT)
• 4 x 1/4" ring terminals for the circuit breakers
• 4 x 5/16" ring terminals for the batteries
• Instructions / wiring diagram

AGM batteries

• Charging with a vehicle: (even while towing) a DC to DC charger is recommended to prevent damage to your vehicle's alternator due to LifePO4's ability to charge so quickly. New vehicles with "Smart" alternators may not need this.
• Shore power charging: You may desire an upgraded DC converter as your trailer's current DC converter may only charge the battery to 50-60%. (LifePO4 at low charge has the same voltage as traditional batteries at full charge). The solar charger will continue to fully charge the battery though.